• If you are citizen of an European Union member nation, you may not use this service unless you are at least 16 years old.

  • You already know Dokkio is an AI-powered assistant to organize & manage your digital files & messages. Very soon, Dokkio will support Outlook as well as One Drive. Check it out today!

View
 

Example: Thermal energy 1

Page history last edited by Joe Redish 5 years, 7 months ago

 Working ContentMacroModels > Thermal Properties of Matter >Thermal energy and specific heat

 

Prerequisites:

 

As an example, let's do some specific calculations.

 

You have two beakers of water with different amounts of water at different temperatures. If one beaker holds 100 g of water at 80 oC and the other holds 200 g of water at 20 oC, what will be their temperature of you mix them together? 

(Image adapted from the work of Thornton & Sokoloff)

There is not really enough information to answer this. The beakers are also in thermal contact with the water. Their temperatures will change in the process as well. Our system schema should at least include the two amounts of water and the two beakers (and there seems to be a stirring rod in the picture as well!). And the water in the beakers will interact with the air, the beakers with the hands of the scientist, etc., etc., ...

 

But we should be able to get a pretty good idea of what the answer will be. When you mix two liquids together and stir, they share thermal energy very quickly. The exchange of heat with the beakers will be considerably slower, and air is a very good insulator so the exchange of heat with the air shouldn't matter if we stir the water together and measure its temperature within a few seconds of the mixing. So let's take as our system the two different amounts of water and only consider exchange of heat between them.

 

The story of this reduced problem is basically this: The two amounts of water are at different temperatures. When they are mixed together, thermal energy flows from the hot liquid into the cool liquid until their temperatures are equal. The foothold physical principles we need are

 

  • Conservation of energy -- whatever energy leaves on block of water flows into the other;
  • Principle of specific heat -- the heat is translated into temperature via the heat capacity of the objects.

 

Translate these into equation by naming variables. Let the 100 g of water be mass 1 and the 200 g of water be mass 2. Conservation of energy says

 

Q2 = -Q1

 

that is, the heat that enters object 2 is the heat that leaves object 1. (From what we know about how heat works, we are assuming that the energy will flow out of the hot object and go into the cold. So if Q2 is positive, then Q1 must be negative.) The principle of specific heats says the change in an object's temperature is related to its heat capacity: C = mc, its mass times its specific heat. So we have the equations:

Q1 = m1c1ΔT1

Q2 = m2c2ΔT2

 

Putting these together,

m1c1ΔT1 = -m2c2ΔT2

 

As usual, for practice (and for generality) we'll work this through with symbols and only put the numbers in at the end. We are looking at changes in temperature so writing (as is always true for deltas)

 

ΔT = f - i

 

In our particular case, the two objects (blocks of water) start out at different temperatures and end at the same temperature. Let's call both final temperatures T. The equation then becomes:

 

m1c1ΔT1 = -m2c2ΔT2

m1c1(T1f - T1i) = -m2c2(T2f - T2i)

 

Since the masses are both water they have the same specific heat, c1 = c2, and we can cancel them out. (This ignores a small variation of specific heat with temperature.) 

 

(100 g)(T - 80 oC) = -(200 g)(T - 20 oC)

 

Multiplying out (don't forget the minus sign on the right!) gives

 

(100 g)T - 8000 g-oC = -(200 g)T + 4000 g-oC

 

Bringing all of the terms with the unknown (T) to one side and solving, we get

 

(100 g)T + (200 g)T = 4000 g-oC + 8000 g-oC

(300 g)T = 12000 g-oC

T = (12000/300) (g-oC / g) = 40 oC

 

Checking our answer: The units come out right -- degrees C, as we expect. And the amount looks right too. Since there is twice as much cold water, the change in the temperature of the hot (40-80=-40) should be twice the magnitude of the change of the cold (40-20=20) and it is.

 

 

Joe Redish 11/21/14

 

 

Comments (0)

You don't have permission to comment on this page.